Choose Binar for
One or two riders who want a supported seating position and the option to change orientation rather than a simple flat deck.
Official Jobe distributor guide
Jobe Binar 2P Towable Buyer and Setup Guide for Malta
Decide whether the sofa-style Binar suits your riders, understand its two towing orientations, and match it with the correct rope, pump, bridle and flotation equipment.
BoatSalesMalta is the official exclusive Jobe distributor in Malta. Guide reviewed 10 November 2026.
Is the Binar 2P right for you?
The Binar is a supported, sofa-style towable for a maximum of two riders. Its backrest, armrest guards and soft top favour seated comfort, while the two separate tow points let the towable be pulled in two different orientations.
Compare another style when
You prefer a flat-deck ride, a banana-style shared ride, a convertible backrest or capacity for more than two riders.
Larger group
Compare the Jobe Binar 4P. Capacity changes the rope, vessel and setup requirements; never exceed the stated rider limit.
How the two tow points work
The Binar 2P has two quick-connector tow points so it can be used in two orientations. Select the connector for the intended riding direction and attach the tow rope to one tow point as directed by Jobe. Do not connect one rope to both tow points.
Before towing: read the supplied manual, confirm the chosen orientation, inspect both connectors and remove all slack gradually. The driver and observer should agree with the riders before the boat accelerates.
On a phone, swipe the table sideways to see every column.
| Maximum riders | 2 persons | Inflated size | 247 × 183 × 70 cm |
|---|---|---|---|
| Handles | 7 with neoprene knuckle guards plus 2 neoprene handles | Deck height | 30 cm |
| Cover | 840D double-stitched nylon | Inner | 28-gauge PVC air chambers |
| Valve | One-way Boston valve | Official product ID | 230223001 |
Complete Binar 2P equipment checklist
Correct tow rope
Use a properly rated two-person towable rope, not a wakeboard or waterski rope. The Jobe 2 Person Towable Rope is the matching capacity choice.
Inflation pump
The Jobe 12V Air Pump uses a vehicle-style lighter socket and includes three nozzles. Match the correct nozzle and follow the towable manual.
Bridle when required
A vessel with two suitable stern tow eyes may need a correctly rated bridle. Compare the 2P bridle with pulley and 2P bridle without pulley only after checking the boat and engine arrangement.
Flotation and observer
Every rider needs correctly fitted flotation equipment appropriate to the activity and local requirements. The boat also needs a responsible driver and a separate observer watching the riders and rope.
Browse towable accessories · Browse Jobe life vests · Read the life-jacket and buoyancy guide
Pre-launch and first-ride checklist
- Inspect everything: towable, cover, handles, valve, connector, rope, bridle, tow point and flotation equipment.
- Inflate to the manual: use the correct adapter and shape. Do not publish or rely on an assumed pressure that is not stated for the exact model.
- Allow for heat: Jobe warns that air expands in heat. Do not overinflate or leave a fully inflated towable exposed unnecessarily.
- Select one tow point: attach the rope to the connector for the chosen orientation and confirm that the quick connector is secure.
- Agree hand signals: riders, driver and observer should know the stop, slow-down and okay signals before moving.
- Take up slack slowly: keep the rope away from riders and propellers, then accelerate gradually only when the observer confirms the area is clear.
Manufacturer maximums are not target speeds. Select a lower safe speed for rider age, experience, water conditions and turns, and follow the manual and local rules.
Common setup problems
Towable drags or ploughs
Stop and check inflation, rider position, tow-point orientation, rope routing and vessel setup. Do not try to cure a setup problem simply by adding speed.
Rope repeatedly goes slack
Review the driver's acceleration and turns, rope condition, tow-point height and rated setup. Sudden loading can damage equipment or injure riders.
Riders are uneven
Return to idle, stop safely and rebalance the riders. Do not let a rider move position while the rope is loaded or the towable is accelerating.
Malta saltwater, sun and storage care
- Rinse the towable, rope and suitable accessories with fresh water after sea use.
- Let everything dry completely before folding or packing.
- Protect the cover and PVC from prolonged strong sun and excessive heat when not in use.
- Store the towable cool, dry and loosely packed; inspect it again before the next session.
- Use the repair method and materials specified by the manufacturer.
Jobe Binar questions
Do I attach the rope to both Binar tow points?
No. The two connectors provide different riding orientations. Attach the correctly rated rope to one selected tow point following the Jobe manual.
Does the Binar 2P include a rope and pump?
Do not assume so unless the exact listing says it is a package. The towable, correctly rated rope, pump, any required bridle and flotation equipment must all be confirmed.
Can more than two children ride it?
No. Jobe states a maximum of two persons; the rider limit still applies when the riders are children.
Where can I get Jobe setup advice in Malta?
BoatSalesMalta is the official exclusive Jobe distributor in Malta. Contact the Qawra team with the boat, tow-point arrangement and intended riders.